BACKDOOR.Unisonus.com / WMSTAMP project

WM8816 stamp project

Programming / learning mode

To initiate 'lerning' process PROG jumper have to be removed.

It's easy - just follow the commands step by step. You can use every RC5 remote control (Philips, Daewoo, LG, Marantz, universal...).

"teach me my master"

"volume up"
Press remote button which you wont to assign volume up.

"volume down"
Press remote button which you wont to assign volume down.

"volume speed"
Remote button which will be responsible for volume step size (0.5dB or 2.5dB).

"on/off"
On/off button on remote.

"mute"
Mute button on remote.

"brightness"
You can control LCD backlight intensity using 'volume up' and 'volume down' buttons programmed before (from 0 to 255). Press 'on/off' button to remember setting.

"volume control"
By pressing 'volume speed' button programed before you can change settings between "push buttons" or "encoder" for external volume control device (buttons or encoder). Press 'on/off' button to remember setting.

"selector up"
Increase selector input. If you don't wont to use this option - just press 'on/off' button. "clear" will appear for a moment.

"selector down"
Decrease selector input. If you don't wont to use this option - just press 'on/off' button. "clear" will appear for a moment.

"input 1"
Selector input 1 control button. If you don't wont to use this option - just press 'on/off' button. "clear" will appear for a moment.
.
.
.
"input 6"
Selector input 6 control button. If you don't wont to use this option - just press 'on/off' button. "clear" will appear for a moment.

"now I know"

PROG jumper have to be insert after programming/learning!